Installation and Code Disclaimer

Lumera Electric supplies electrical products, lighting, and related components for use by qualified professionals and informed buyers. Please review the following before purchasing or installing any product.

Code compliance. All electrical installations must comply with the National Electrical Code (NEC) and any state, local, or municipal codes and amendments that apply at the installation site. Local requirements vary and take precedence. It is the buyer's and installer's responsibility to confirm code compliance for their specific project and jurisdiction.

Qualified installation. Electrical work can be hazardous and should be performed by a licensed, qualified electrician. Improper installation may create a risk of fire, shock, equipment damage, or code violations, and may void manufacturer warranties.

Verify specifications before purchase. Product specifications, ratings, dimensions, finishes, and compatibility details are provided based on manufacturer data and are subject to change by the manufacturer without notice. Confirm voltage, amperage, load type, mounting, location/environmental ratings, listings (such as UL or ETL), and compatibility against the manufacturer's official specification sheet before ordering and installing.

Manufacturer instructions. Always follow the manufacturer's installation instructions and listed conditions of use. Use each product only within its rated and listed application.

No professional advice. Product descriptions and application examples are general information for selection purposes and do not constitute engineering, design, or code-compliance advice. They are not a substitute for the judgment of a licensed electrician or design professional.

Limitation of liability. Lumera Electric is not responsible for installations that do not comply with applicable codes or manufacturer instructions, or for damages arising from improper selection, handling, or installation of products.

If you have questions about a product's suitability for your application, contact Lumera Electric before purchasing.